E-mail: manager@zgjrjx.com
Tel: +86-13273731689
Contact Us

Henan Jinrui Machinery Co.,Ltd

ADD:Jingu Square, Pingyuan Road, Hongqi District, Xinxiang, Henan, China

East of Industrial Zone, Huangling Town, Fengqiu County

Contact:Frank Lee

TEL:86-373-7181222

Phone:86-13273731689

Fax:86-373-3366119

Email:manager@zgjrjx.com

Web:http://www.jrcrane.com

Zip:453000

Home > Exhibition > Content

Bridge crane hook adjust and repair

Jinrui crane is one of the manufacturers and suppliers of bridge crane made in China, Bridge crane also can be named overhead crane, EOT crane, usually used in workshop, warehouse, factory, etc. We supply customized service and cheap price, please do not hesitate to contact us.


Now, we will discuss something about bridge crane hook adjustment and repaire.


Hook is the most widely used lifting grab devices, play a important role in lifting job. Hook and pulley make into hook set, and work together with flexible lifting components.


According to the different capacity, Lifting crane machine apply single hook and twin hook. Large capacity bridge cranes use twin hooks, others use single hook.


Ensure the hook can be safe and stable operation, please following the below notes:


1. the factory should manufacture hooks in accordance with technical specifications and safety requirements, the hooks should have the manufacturer's quality certificate.


2. The new hook should be done load testing, hook opening should not exceed 0.25% of the original opening.


3. During using process, should regularly check hooks, make sure there is no cracks, severe deformation, corrosion and wear.


4. Hook test once a year. Tests at 1.25 times rate working load for 10 minutes of static test, and check with a magnifying glass, there should be no cracks, nicks and deformation.



5. Clean the dangerous section with kerosene, use a magnifying glass to see if there is cracks. Hook plate bushing and safety pin should be checked for wear.


6. There is defect repair welding, the hook shall not be on work.


7. Hook must set locking device to prevent accidental decoupling.



Previous: How to prevent crane overturned

Next: No Information